11kW 4 in 1 Fixed Speed Single Stage Air Compressor

Elily 11kW 4 in 1 Fixed Speed Single Stage Air Compressor: An integrated system featuring a built-in post-treatment unit. It delivers stable, high-volume airflow and utilizes a robust, low-maintenance fixed-speed motor. Ready to use upon connection, it is ideal for the compressed air needs of small-to-medium-sized workshops engaged in mass production.
I. High-Power Fixed-Speed Drive: Abundant Airflow and Strong Load Capacity
Powered by an 11kW national-standard fixed-speed motor with direct-drive transmission, it ensures stable power output. With a rated discharge capacity of 1.6 m³/min at 0.8 MPa, it can simultaneously power multiple pneumatic tools. The load/unload cycle is smooth with minimal pressure fluctuation, meeting the continuous air supply demands of small-to-medium workshops. The motor is heat- and overload-resistant, ensuring reliable operation without overheating or tripping during prolonged full-load use—perfect for high-intensity working conditions.
II. Integrated 4-in-1 Layout: Space-Saving and Cost-Effective Installation
The 11kW 4 in 1 Fixed Speed Single Stage Air Compressor features a compact, integrated design combining the compressor, air receiver tank, refrigerated dryer, and precision filters. Compared to traditional split-system setups, it reduces the required footprint by over 30%. Factory-pre-piped and leak-tested, it eliminates the need for professional on-site piping or commissioning; simply connect the power and air lines upon delivery to start production. This significantly cuts installation time and piping costs while keeping the workshop organized and clutter-free.
III. High-Efficiency Refrigerated Drying & Precision Filtration: Industrial-Grade Air Quality
Equipped with an oversized 2.0 m³/min refrigerated dryer, the unit offers high condensation and water-removal efficiency, preventing moisture accumulation in the air supply. A four-stage progressive precision filtration system deeply removes oil mist and dust impurities (filtration accuracy: 0.01 ppm). The clean, dry output air effectively protects spray guns, pneumatic valves, and precision machining equipment, thereby extending tool service life.
IV. Rigorous Quality Control: Low Failure Rate During Long-Term Operation
Each 11kW 4-in-1 fixed-speed unit undergoes an 8-hour factory burn-in test, including comprehensive checks on pressure, flow rate, noise levels, and temperature rise. It features an orderly circuit layout and comprehensive protective systems. Proven through long-term, real-world operation in settings such as auto repair shops, packaging plants, and hardware workshops, it delivers stable performance, requires only simple routine maintenance, and boasts a failure rate far lower than that of standard piston compressors.

Key technical parameters：

Product Applications

Suitable for a wide range of applications—including full-scale pneumatic operations in auto body repair, woodworking (carving and cutting), packaging lines, small-scale stamping, textile machinery, hardware coating, and automated auxiliary equipment—this system delivers ample, clean compressed air, making it ideal for simultaneous, steady air supply to multiple pieces of equipment in small and medium-sized factories.

Company Capabilities

Backed by a team of engineers experienced in cutting-edge air compressor technology, the company specializes in the R&D, production, and sales of various screw air compressors—including fixed-speed, permanent magnet variable frequency (PMVF), two-stage compression PMVF, low-pressure, and portable models—as well as blowers and vacuum pumps. All of the company's PMVF air compressors have achieved Grade 1 energy efficiency certification.
The Guangdong branch is located in Liaobu Town, Dongguan, featuring a production base with over 20,000 square meters of standardized factory space. The company utilizes state-of-the-art manufacturing and testing equipment and maintains strict professional standards for its technical workforce. All products are equipped with Hanbell air-end units (manufactured using Taiwanese technology), Grade 1 energy-efficient PMVF motors, and Zhongchen split-type inverters; other components are sourced exclusively from leading domestic energy-saving brands.
The company provides comprehensive pre-sales, in-sales, and after-sales services, engaging with every client requiring non-standard, customized solutions with the utmost professionalism.

After-Sales & Service

Rapid Response: After-sales requests addressed within 2 hours; on-site service provided within 48 hours (covering major cities nationwide).
Professional Team: Certified senior engineers provide comprehensive, one-stop services, including installation and commissioning, operational training, fault diagnosis, and routine maintenance.
Parts Availability: Ample stock of common parts sourced directly from the manufacturer; standard models available for immediate shipment to ensure uninterrupted production.
Transparent & Worry-Free: Maintenance involves only the replacement of lubricating oil, air filters, and oil separators—with no hidden fees.
Choosing Elily means choosing a long-term partner that saves you time, money, and worry.

FAQ

How much greater is the air output of the 11kW model compared to the 7.5kW model?
At the same pressure, the air output is approximately 60% higher, allowing it to power 2–3 additional pneumatic tools; it is ideal for workshops with multiple workstations and high air consumption.
Can it operate normally in low-temperature environments during winter?
Yes. The unit features a design optimized for low temperatures regarding heat dissipation and oil circulation, ensuring stable operation in environments ranging from -5°C to 45°C. The water removal efficiency of the refrigerated dryer remains unaffected by ambient temperature.
Is the machine noisy during operation?
The measured operating noise level is 64±3dB, comparable to the volume of a normal conversation. With built-in sound-insulating material, there is no need to construct a separate soundproof room; the unit can be placed directly on the workshop floor.
Are you a factory or a trading company?
We are a factory located in Dongguan, Guangdong, with a 20,000 m² production facility, enabling us to provide direct factory pricing and technical support.
Do you accept OEM or OBM customization?
Yes. We support OEM customization for machine color, nameplates, logos, packaging, and manuals, and can also provide brand customization based on customer requirements.
What is the minimum order quantity (MOQ)?
The MOQ for standard models is 1 unit. The MOQ for OEM customization is 5–10 units, depending on the specific customization requirements.
Do you accept sample orders?
Yes. Customers can order a single unit for testing purposes at the standard factory price; sample orders are also covered by the warranty.